If you have a unit with the auto broadcast feature, it may need to be turned off if possible to use Hyper Terminal for basic command testing. Please note this control will work for units that do not have an auto broadcast feature (constant auto reply). ![]() By doing this you will be able to send the commands as a string or packet as required. We then recommend you save the session by clicking File and Save so that you can easily come back and initiate a communication session. and then check off the Echo Typed Character Locally box and click OK and OK again. ![]() To do this click File, Properties, Settings, ASCII Setup. The second item that must be set is the echoing of characters locally. We always suggest you check the protocol document regardless as requirements for newer devices may change. The typical settings for an AVR are 9600 8N1 no flow control, meaning 9600 baud, 8-bit, no parity, one stop bit, and no flow control.įor a DVD player the typical settings are 9600 8E1 no flow control, meaning 9600 baud, 8-bit, even parity, one stop bit, and no flow control. Once the COM port is selected you will be prompted to set the proper port settings.įire emblem souen no kiseki iso. Once you press enter you will be able to then select the COM port you will be using. When Hyper Terminal is opened it will ask you to select an icon and to name the session. ![]() The first will be to set the COM port's settings properly. You will need to do two things for it to work properly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |